Workshop manual. English. XP. For Husqvarna Parts Call or Workshop manual. 90 , , XP, For Husqvarna Parts Call or XP, XPG, Xp E-tech, XPG E-tech, , G, E-tech, G E- tech, TrioBrake. Please read the operator’s manual carefully and make sure.
|Published (Last):||8 March 2013|
|PDF File Size:||11.71 Mb|
|ePub File Size:||10.58 Mb|
|Price:||Free* [*Free Regsitration Required]|
General rules 364xp you understand what kickback is and how it happens then you can reduce or eliminate the element of surprise. If the muffler on your saw is fitted with a spark arrestor mesh this must be cleaned regularly. Carry the saw with the bar and chain pointing backwards. B Finish by cutting from above so that the two cuts meet. This is especially true of chain saw safety equipment.
Please read the instructions carefully husqvwrna make sure you understand them before using the saw. Aim the tip of the saw at a light coloured surface about 20 cm away.
When you buy any of our products we guarantee the availability of professional repairs and service. Check the throttle trigger for smooth operation. ,anual of 36 Go. Adjustments are made by turning the screw using a screwdriver or combination spanner. Husqvarna Workshop Manual 50 pages.
Husqvarna 346XP E-tech User Manual
Table of Contents Add to my manuals Add. Never limb above shoulder height. This manual also for: Cutting Equipment 7 Muffler Never use a chain saw that has a faulty muffler. A blocked mesh will cause the engine to overheat and may lead to serious Please husqvadna these instructions carefully and make sure. Check that husqvarnw chain brake is in disengaged position by moving the front hand guard towards the front handle.
Stop Switch 5 Vibration damping system Your chain saw is equipped with a vibration damping system that is designed to minimise vibrations and make operation easier.
Husqvarna Workshop Manual 52 pages. The following engine speed applies: Turning the husqvarnna clockwise will reduce Spark plug The spark plug condition is influenced by: Don’t show me this message again. This results in damage to the oil pump, the bar and the chain. The way the chain brake is triggered, either manually or automatically, depends on the husvqarna of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes.
Always wear safety goggles for eye protection. Chain saws can be dangerous!
When the chain is blunt you have to exert more pressure to force the bar through uhsqvarna wood and the cuttings will be very small. If you have spilt fuel or chain oil on the saw.
Page 22 C Clearing the trunk and preparing your retreat Remove any branches that are in the way. To maintain cutting performance you must file back the raker teeth to the recommended height. By pressing ‘print’ button you will print only current page. Never use a chain saw if you are tired, if you have drunk alcohol, or if you are taking medication that Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen.
Fit a guard to the bar before carrying the saw any distance.
Husqvarna XP User Manual | 36 pages
The saw is supplied from the factory with the screw set to position 2. A Husqvarna chain saw can be equipped with different types of airfilter according to working and weather conditions, season etc. Take off the bar nuts and remove the clutch cover. Check that the throttle control and throttle lock move freely and that the return nusqvarna work Press the husqvxrna lock and make sure it returns to its original position when you release it.
If any binding occurs, or if engine fails to return to idle, the saw should be taken to your dealer, before it is used again.
The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything. Kickback is usually quite mild, but it can sometimes be very sudden and violent.
H Bar Check regularly: Throttle Lock 2 Throttle lock Make sure the throttle control is locked at the idle setting when you release the throttle lock.
Page 11 1 Cutting equipment designed to minimise kickback Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Replace the bar if necessary.
Daily Maintenance Below you will find some general maintenance instructions. Mounting guide bar and chain Always wear husqvsrna, when working with the chain, in order to protect your hands from injury.
Husqvarna 346XP Operator’s Manual
By being prepared you reduce the risk. Remove these with a file if necessary. Table Of Contents Long term inhalation huusqvarna the engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk. The chain brake reduces the risk of accidents, but only You can prevent them.
Basic Cutting Technique Before moving your chain saw switch off the engine and lock the chain using the chain brake.
Got it, continue to print.